Maintenance:
Q: How to clean the machine?
A: To refresh the inside parts of the system, you can choose to rinse several times without the capsule and try to wipe the inside of the group head with a soft brush or cloth from time to time. Clean the casing with a soft damp cloth. The water tank and drip tray can be washed in warm water (not hot water).
IMPORTANT: Before attempting to clean the machine, remove the plug from the power outlet. Do not immerse the machine, and/or power cable in water or other liquids. Allow the machine to cool before starting the cleaning procedure.
Q: Do I need to decalcify the machine? If so, how often?
Answer: Yes. Please see the chart below.
|
TYPE OF WATER |
DESCALING FREQUENCY |
|
Soft water (filtered water) |
Every 300 brew cycles |
|
Hard water (tap water) |
Every 300 brew cycles |
Q: How should I decalcify my machine?
Answer:
Step 1. Fill water tank with 110ml pure water (around 80% of the total capacity).
Step 2. Pour in to the water tank your scale remover, wait for 5minutes or stir to dissolve.
Step 3. Install the water tank to the correct position carefully and press the 110ml button no less than 3 times.
Step 4. Wait for 10 minutes and pour pure water into water tank and start rinsing again for 2 times.
Step 5. Damp a soft cloth in a warm water and start wiping the inside of the group head of the machine.